In order to make the trex or composite decking look as good as possible, you should put a coat of paint on it. Although manufacturers demand that the color of trex or composite decking is permanent, they will surely fade in time.
Therefore, you can surely paint your composite decking when you want to change the color completely or simply like to freshen the look of the deck. Before you start applying paint on the composite deck, you need to sweep excess debris like dirt and leaves off the deck.
In order to clean the deck, you can use a good quality composite deck cleaner. Age is important. As composite decking ages, its color starts to fade. And if your decking is at the end of its lifespan, you might want to replace it rather than refinishing it. Most of the composite decking has a lifespan of roughly twenty-five years.
And if your decking is more than twenty years old, replacing it might be a good idea. One of the main reasons for painting or staining composite decking is to achieve a custom color to match your house.
Stains and paints for composite decking are available in many colors. Choose a color that is suitable for you. Before you apply the stain or paint to your deck, first apply it on a small piece of composite decking to see how it looks. Also, always choose high-quality paints and stains.
They might be a bit costly, but they will most probably last longer, which justifies their extra cost. Choose paints and stains that provide UV ray protection to your decking.
You can also look for stains that contain zinc. Zinc resists the growth of molds and prevents discoloration. Use a composite deck cleaner or a scrub brush to get rid of all the mildew, dirt, mold from the composite decking surface.
Once you have got rid of all the molds, dirt from the composite decking surface, you have to prepare the surface so that paints or stains can stick to it properly. Sand the surface using or grit sandpapers. But remember not to overdo it. Or else you might damage your deck. After sanding, get rid of all the dust and apply primer. Acrylic latex-based primers are best for composite decking. They increase the durability of the stain or paint. Before painting or staining your composite deck, always consider the weather condition.
You love your composite deck. What about staining or painting — can you paint composite decking? Can you stain composite decking? Although, it's important to note that newer styles of capped composite decking cannot. If your first generation composite deck is showing some signs of fading, then it may be time to take matters into your own hands… Literally.
Grab a brush, some paint, and the other necessary tools and get started bringing your deck back to its original beauty. Staining your first generation composite deck follows a lot of the same rules and steps of painting your deck. If your deck is beginning to fade and you want to enrich its natural-looking color, simply follow these staining steps for a deck that will look good as new. After all, your composite deck was specifically made to prevent you from having to do such intense maintenance.
But for smaller spot jobs, such as grease or rust stains, you may need to do some touching up. Whether to paint or stain composite surface depends on the type of composite deck you have at home. If you have capped composite decking, consider painting instead of staining it. Applying two coats of paint on a prepped composite deck will provide a thick, longer-lasting layer and a better finish for your deck boards.
We recommend using the highest quality exterior latex deck paint designed for decks to achieve the best results. You can stain composite decking like a standard wooden deck if it is uncapped. We recommend using an oil-based composite deck stain for better penetration and a more superior, moisture-resistant finish. Staining has the advantage of saving you some time, so you should choose it over painting whenever the material allows it. In this case, staining should be the preference for a non capped composite decking.
Paint, on the other hand, requires coating the surface with a primer first. This process can be more time-consuming than staining. Penetrating deck stain is the best for composite decking. These solid stains can also start flaking and peeling in a matter of months, unlike penetrating stains that soak into the planks and provide more protection.
Consider using an acrylic latex stain with mildew inhibitors and UV blockers for best results. In terms of stain colors, you can pick a semi-solid or semi-transparent stain since they do not form a surface film. As for what kind of paint can you use on composite decking, always go for high-quality latex paint.
Consider going for a satin or semi-gloss finish to get a slick, shiny look on your pained composite decking. Additionally, most manufacturers will be willing to recommend the type of paint to use with their composite deck boards.
If you prefer this option, consider asking your manufacturer to recommend paint for you. Trex decking tends to have a glossy feel to them. If you want to maintain that sheen on your painted Trex deck, use high-quality latex paint in a semi-gloss or satin finish. You can choose your preferred color as such paints are available in a wide range of colors.
Composite decking requires latex paint with a satin or semi-gloss finish. To paint Trex deck, always start with an acrylic latex primer designed specifically for outdoor use. You should get some excellent coverage with Valspar or Rustoleum brands for composite decks.
0コメント